Play / Enter / Freeze:
This knob starts and stops Modulator 1, if Modulator 1 trigger source = Play
or MIDI. It also works as a midi note on indicator – every time a midi note on, on the
selected midi-channel, are received it will light up.
When you select a new preset, it will start blinking, and you will have to push it to
confirm.
When on a granulator/delay edit page, this acts as a freeze knob, and freezes/un-
freezes the granulator/delay every time it is pushed. It lights up, when freeze is active.
Cursor (click) value:
This knob navigates around, changes preset, and changes various switch
functions on the parameter edit screens.
If the cursor is blinking, turning this knob will move the cursor. Pushing it will stop
the cursor from blinking, to change a value, or entering another screen.
If the cursor is not blinking, turning this knob, will change the value of the parameter,
where the cusor are located. Pushing it will get the cursor blinking to move it, or it
will enter another screen.
Volume:
Changes the output volume on the audio and phones outputs.
Phones:
Below the ”Phones” text on the front-side of Anamono, a phones output are located. It
is possible to connect a pair of stereo headphones to this.
