The Preset Select Page
The Preset Select Page
The Preset Select Page
The Preset Select Page
Every time you turn on your Anamono, it will for a short while write:
In it’s display.
Right after that, it will go to this screen:
This is the Anamono main page.
On the top of the display it writes the name of the selected preset. It remembers what preset was
selected, when it was turned off, and goes to that preset when it is turned on again.
On the bottom of the display it writes the selected preset bank and number. Anamono has sixteen
banks (A-P) with each 16 sounds (256 in all). The number shown in paranthes, are the MIDI bank
select number (MIDI ctrl 32) followed by a slash and the MIDI program change number you will
have to transmit to Anamono, for selecting this preset, from an external MIDI-device.
As default, when entering the preset select page, the cursor is located under the preset number
select, so you immediately can select a preset. It is also possible to locate the cursor under the bank
select letter, or ”Edit”, if you wish to enter the edit pages.
To change preset: If the cursor is not blinking, push the cursor(click)value encoder, to make the
cursor blink. Rotate the cursor(click)value encoder in either direction to place the cursor under the
letter, if you want to change the bank number, or the number if you want to change the preset
number. Push the cursor(click)value encoder, so the cursor is not blinking. Rotate the
cursor(click)value encoder to select the preset you want. It will write the preset name in the top of
the display. The play/enter/freeze knob will now start to blink. Push the play/enter/freeze knob to
confirm change to the selected preset.
Gotharman’s
AnaMoNO
[VoiceYouJoy ]
A01 (0- 0) Edit
