GuitarPCB Angry Llama, Build Instructions

Page: 1 / 4

GuitarPCB.com
Angry Llama Build Instructions
Based on one of the most popular DIY Builds the original Red Llama™ by Way Huge™. Our version also includes an
added Gain Stage for those people want more available Gain (Distortion). We do this without sacrificing the original
circuits unique tone by adding a clean stage at the end of the circuit. Furthermore, we used Gain mapping to make it
when the Boost control is turned down full CCW you get the exact same great tone as the original Llama with the
ability to add more Gain by turning the Boost control up CW from there. This will create more available distortion
than the original circuit while preserving the character of the original. We have also added a Hot Switch at SW1. Use
these options separately or together to adjust your final sound or set Boost to full CCW for stock tone.
Board Dimensions (W x H) 1.95 x 1.65 inches
PARTS LIST
Part Value Part Value Part Value
R1 1M C1 68n Q1 J113
R2 100k C2 100p LEVEL A10k
R3 330k* C3 33n GAIN B1M
R4 10M C4 100p BOOST A100k
R5 1M C5 10u
R6 33k C6 100n D1 CA Status LED
R7 1M C7 100u D2 1n5817
R8 1k C8 22u
R9 33k C9 220n SW1 SPDT ON-ON
R10 1k8 IC1 CD4049UBE TR1 20k