Step 16: Ladder
2 x 4 x 17”
Ladder
Step
2” Wood Screw
T-Nut
2 x 4 x 66”
Ladder Side
5/16” Washer
5/16 x 1-1/2”
Hex Bolt
90 ° Angle Bracket
2” Wood
Screw
5/4 x 3 x 18-3/4”
Ladder Back
1: Find two 2 x 4 x 66” ladder
sides. 2: Position the ladder sides
so that the slots in the boards are
facing each other and are parallel.
3: Insert t-nuts into the outside of
the ladder sides and set with a
hammer.
4: Find five 2 x 4 x 17” ladder steps.
5: Place the steps into the slots on the
ladder sides, and fasten with 2” wood
screws.
6: Carefully turn the ladder over and
put the screws into the other side.
7: Install the 90° angle brackets to
the inside of the ladder rails with 5/16
x 1-1/2” bolts, 5/16 washers, into the
5/16” t-nuts.
8: Install the 5/4 x 3 x 18-3/4” ladder back
above the top step of the ladder with two 2”
wood screws per side.
®
Page 48
