26
MDE-LEDI-NETWORK-TDS-4099V1.0
IPv4 Settings
The current IPv4 parameters are displayed.
►
Address from DHCP server
If the box is checked, the LEDI
®
NETWORK TDS V1 attempts to get an IPv4 ad-
dress from a DHCP server on startup. Failing to obtain an address this way will
result in the server using its automatically configured IPv4 address.
Unchecking the previous checkbox gives access to the following settings:
►
IP Address
Sets up the IPv4 address of the LEDI
®
NETWORK TDS V1 on the network under
the following format: xxx.xxx.xxx.xxx, where “xxx” are numbers from 0 to 255.
►
Network submask
Sets up the mask of the sub-network to be used. For example, 255.255.255.0 indi-
cates that the scope ranges from 192.168.0.1 to 192.168.0.254.
►
Gateway address
The gateway address must be determined for the LEDI
®
Network TDS V1 to be able
to communicate with elements of the submask. Otherwise leave a blank field.
►
Auto-IP Adress Enable
If the box is checked, an Auto-IP address (i.e. 169.254.x.x/16) is attributed to the
server in addition to the manual or DHCP address. This is a default setting.
IPv6 Settings
The current IPv6 parameters are displayed.
►
Address from DHCP server
If the box is checked, the LEDI
®
Network TDS V1 attempts to get an IPv6 address
from a DHCP server on startup. Failing to obtain an address this way will result in
the server using its automatically configured IPv6 address.