manualshive.com logo in svg

Gorgy Timing LEDI NETWORK TDS V1, User Manual, Page: 11 / 68

Share
Download
Gorgy Timing LEDI NETWORK TDS V1 User Manual Download Page 11

11

MDE-LEDI-NETWORK-TDS-4099V1.0

4. FRONT 

LCD DISPLAY

The front display interface can display up to 4 lines of 20 characters. Six buttons enables 

the user to navigate in the menus and change some settings. 

 

►

A RESET button allows to restart the device except for the GPS input card.

 

►

A POWER button lights up when the device is under power.

 

►

A SYNC button lights up when the device is synchronized. It turns off when the device is 

unsynchronized even if it has battery left.

 

►

An ALARM button blinks when the device is not operating properly (e.g. synchronization 

or power loss).

4.1. STARTUP

During start-up, the LCD screen displays the message “Init…” until the embedded software 

starts and displays the loading advancement of the various software modules: 

 

The firmware version is displayed on the second line during the loading process. 

 

Init . . .

LEDI NETWORK TDS V1

 v18.106

*- ***********    -*

*-USER INTERFACES -*

ENGLISH

Summary of Contents for LEDI NETWORK TDS V1





































































Reviews:

No comments