2
MDE-LEDI-NETWORK-TDS-4099V1.0
WARNING! The following section provides the safety instructions for the installation. Please
read it carefully before installing your device.
To protect your device, connect power on UPS (Uninterruptible Power Supply).
The device must be connected to an electrical installation complying with the NF C15-100
standard.
The wiring installation must include an easily accessible power protection system (circuit-
breaker or disconnecting switch) compatible with the nominal voltage and current values
specified on the device.
In Europe: in accordance with European regulations on the protection of the people and the
environment, this device must be disposed of in a collection site designed for this purpose
(separately from household waste). Please contact your reseller, collection site or the com-
petent local authorities for more information.
Modifying or opening the product without the consent of the Customer service department
will void the warranty.
The
LEDI
®
NETWORK TDS V1
must be installed, maintained and manipulated only by
a competent person.
All maintenance operation shall be conducted with power shut off, including on systems
connected to relay outputs if any.
Generally, the power cable (230V) and transmission cable (of time signal) should not be
too close to each other so as to avoid interferences (keep a distance of a few centimeters).
The
LEDI
®
NETWORK TDS V1
must be located as far as possible from radiation sources
(speakers, antennas, high frequency equipment, electromagnetic alarms…) in order to avoid
electric interferences.
Gorgy Timing disclaims all liability in case of accident or damage caused by an improper use
of the
LEDI
®
NETWORK TDS V1
.
All GORGY TIMING products comply with the following standards: CE, EN60950-1, EN55022
class B, EN50024
IMPORTANT SAFETY INSTRUCTIONS