16
MDE-LEDI-NETWORK-TDS-4099V1.0
►
Step 2
►
Static mode:
The menu allows to set up:
- The IPv4 address (IP line)
- The sub-mask (MASK line)
- The network gate (GATE line)
The line being modified blinks on the screen.
Use the direction keys “↓” and “↑” to adjust the field value.
Use the direction keys “
” and “
” to switch between fields.
Use the “ESC” key to cancel modifications and return to the previous menu.
Use the “OK” key to validate the new IPv4 settings and move on to step 3.
►
DHCP mode:
The DHCP mode activates the DHCP client in order to obtain the network parame-
ters automatically from a DHPC server on the network.
►
Use the “ESC” key to cancel modifications and return to the previous menu.
►
Use the “OK” key to validate the new IPv4 settings and move on to step 3 if the
settings were changed or to the main menu if they were not
.
►
Steps 3 and 4
The server records the new parameters (message “WRITING TO FLASH) then
reboots (message “REBOOTING”) immediately after.
It is forbidden to try and turn off the device or to disconnect power until the
device has completely rebooted. The last step corresponds to the moment
where the device displays the date, time and synchronization screen once
more.