32
Then add the connected inverter under the corresponding EzLogger Pro, enter the inverter serial number
(S/N) and check code, and click on the “Add” button. Inverter type and description shall
be filled in by the user according to the actual situation.
“Power station contact” and “Power station visitor” shall be filled in by the user according to the
specific circumstances. After filling in, click on “Save” to complete EzLogger Pro binding. If the power
station has more than one EzLogger Pro, you can continue to add other EzLogger Pro for binding, and
finally, click on “Save” to complete the registration and power station creation.
Figure
7
.1-4 Create and Edit Power Station
Serial number and check code of EzLogger Pro and inverter can be obtained through the
labels of the corresponding devices, as shown in Figure
7
.1-5:
Figure
7
.1-5 EzLogger Pro Label
7
.1 Register A New User and Add A Power Station