2
9
6.2 Using ProMate to configure Wi-Fi EzLogger Pro
After Wi-Fi configuration success and EzLogger Pro connecting to router success,the
“SERVER” LED on the EzLogger Pro will blink.After EzLogger Pro communicating with server
successfully,the “SERVER” LED will light.Once the Wi-Fi connecting is successful,Wi-Fi module
will be the STA mode,that means EzLogger Pro cannot search out Wi-Fi hotspot.If the customer
needs to reconfigure the Wi-Fi module connecting to router,it will have to long press the
”RELOAD” button about 5s to change Wi-Fi module to AP mode then,it can be connected to
“Solar-Wi-Fi” again and reconfiguration.
6.2 Using ProMate to configure Wi-Fi EzLogger Pro
Wi-Fi EzLogger Pro’s factory default is static IP (default IP:192.168.1.200).
The user should follow the static IP address connecting way to connect ProMate with EzLogger
Pro.The configuration process is quite similar with LAN- EzLogger Pro,the details please refer to
section 5.2.1:ProMate connecting and using.
