4.5 Connection to the Ripple Control Receiver
15
DI Port
Description
The port is defined as follows:
EzLogger Pro is connected to the ripple control receiver as follows:
Active power derating
Reactive power compensation
Figure 4.5-2 Diagram of Connection of EzLogger Pro DI Port to RCR
Steps:
1. Select a cable of appropriate length, and connect one end of the cable with the ripple control receiver.
2. Connect the other end of the cable with the corresponding DI port of EzLogger Pro, and refer to
Section 4.2.1 Inverter RS485 communication connection method for detailed connection.