FS175
Translation of the original operating instruction and spare parts list
- 27-
5007287-00
BA-E
®
7.
Troubleshooting
Problem
Cause
Remedy
Engine
Engine does not start!
Fuel tank empty
Fill up
Dirty fuel lines
Clean
Bad engine performance!
Dirty air cleaner
Clean
Lowering
Machine lowers without
actuating the foot pedal!
Faulty gas pressure spring
Replace
Machine does not fully lower!
Undercarriage or gas pressure
spring tight
Check undercarriage and gas
pressure spring
Cutting
Machine rises
out of cut!
Dull diamond blade
Sharpen or use softer diamond
blade
Faulty gas pressure spring
Replace
Feed too high
Reduce feed
Non circular abrasion
of the diamond blade!
Damaged centring of the blade
shaft
Replace blade shaft
Warped blade shaft
Replace
Loose or damaged blade shaft
bearings
Tighten or replace
Diamond blade jams
in the cut!
No free cut because of sidewards
wear-out of segments
Replace diamond blade
Damaged diamond blade core
Replace diamond blade
Abnormal wear-out of
segments!
Insufficient water flow
Check hoses for fracture free laying
Wrong type of diamond blade
Choose different diamond blade
Feed too high
Reduce feed
Cutting in loose underground
Reduce cutting depth
Abnormal blade wear out at
sides of core!
Insufficient water flow
Check hoses for fracture free laying
Cutting in loose underground
Reduce cutting depth
Bad cutting performance!
Slippy V-belts
Adjust
Blunt diamond blade
Sharpen or use softer diamond
blade
Attention: In the event of changes in the behaviour of the machine during operation, stop
the machine immediately and report the malfunction to the competent authority/person!
Note: For more fault finding refer the operating instruction of the engine
manufacturer which is enclosed!
