FS175
Translation of the original operating instruction and spare parts list
- 18-
5007287-00
BA-E
®
Attention: Read and observe all operating instructions which are relevant for the
machine (floor saw, engine ...)!
Attention: Before starting up, check the engine oil level and fill up the fuel!
3.
Preparing for Operation
3.1 Export checking
Remove the transport packaging and dispose of it in an environmentally responsible way. Check the
machine for completeness and intactness. For the scope of delivery, see "Scope of delivery and provided
accessory"
Secure the machine against accidental start-up and rolling away.
The machine is supplied with engine oil but without fuel.
3.2 Installation
Place the machine on an even, firm and stable ground. Have the working area well lightened. Keep the
working area clean, cluttered areas invite injuries. Operating the machine on enclosed premises, make sure
that there is sufficient ventilation. Observe the regulations in force at the respective site.
3.3 Blade
The cutting discs must meet the specification of GÖLZ
®
GmbH. Use the corresponding cutting discs
depending on the material to be processed, the machining process and the type of work to be performed!
When not used properly, no liability is assumed for damages resulting therefrom.
All used cutting discs must be designed, regarding their maximum admissible cutting speed, for the max.
drive speed of the machine. For machines with variable drive speed, use cutting discs which, regarding their
maximum admissible cutting speed, correspond to the respective maximum drive speed of the machine.
Never use faulty or damaged blades. Check the correct rotation of the blade to the spindle shaft!
Check the blade is well fastened before beginning to operate. Defective cutting discs must be replaced
immediately!
Cut off the engine or disconnect the power supply before mounting or changing blade. After mounting, do not
leave any tools, such as open-end spanners, on the machine.
Use only blades suitable to the blade acceptance (arbor hole, flanges).
Note: If the oil level is too low, fill up the engine according to the operating manual of the
engine manufacturer! Fill up the fuel for the engine according to the operating manual of
the engine manufacturer!
Danger: Faulty or damaged blades can cause injuries to the operator and other persons!
