FS175
Translation of the original operating instruction and spare parts list
- 24-
5007287-00
BA-E
®
Attention: When handling oil, grease and other chemical substances, observe the
product-related safety regulations!
Information: Clean the machine after every operation. Observe local environmental regu-
lations!
5.
Maintenance
5.1 General
For maintenance jobs the machine has to be shut down. For maintenance jobs which must be done while the
machine is running, the blade has to be dismounted before beginning the job.
In accordance to the given cycles, the subsequently described maintenance work has to be enforced. Also
the wearing part subject to no certain maintenance-intervals has to be checked regularly for wear and to
adjust if necessary or to exchange. With I.C. engines, the maintenance work has to be enforced in
accordance with the separate maintenance-instruction of the engine manufacturer.
Before
starting
work
After
work
Weekly
Yearly
In the event of
a malfunction
If
damaged
Complete machine
Visual inspection
(condition, absence of
leaks)
X
X
X
clean
X
Flange and blade holder
clean
X
Poly-V belt
check
X
X
X
X
replace
X
Water nozzle and
feeding hoses
clean
X
Tools
check
X
X
clean
X
replace
X
5.2 Lubricating chart
Grease the blade shaft bearings after 20 working hours with heat resistance fat. From time to time clean the
foot pedal, pointer unit and wheels and grease them with some drops of oil.
5.3 Poly-V belt
Unscrew the screws that fix the motor (4x M10x30, DIN EN ISO 4017) and the screw that fixes the eccentric.
Move the motor forwards by turning the eccentric counter clockwise. In this position the poly-V belt can be
replaced easily.
Stress the poly-V belt by turning eccentric clockwise. To fix the motor, screw down the M10x30 screws.
Information: Unconditional observe the owner’s manual of the engine manufacturer,
which is added!
