4
Technical data
21 / 86
4.10
Type plate
The type plate is located on the base frame of the machine.
4.11
Requirements for the installation site
The substrate for the installation must:
have sufficient load carrying capacity.
have a non-slip surface.
be even.
Installation conditions
Select the installation site according to the required space according to the technical data.
4.12
Storage requirements
Storage conditions
Always store the machine, components, assemblies or parts only under the following conditions:
Do not store outdoors
Store dry and dust-free
Do not expose to aggressive media
Protect from solar radiation
Avoid mechanical shocks
Storage temperature 5 °C to 45 °C
Relative air humidity, max. 60
When storing for longer than 3 months, regularly check the general condition of all parts and the
packaging. If necessary, refresh or renew the preservation.
NOTE!
The machine is designed for daylight use. In case of poorly lit or unlit working areas, ensure
sufficient workplace illumination.
Summary of Contents for Bridge Saw
