GÖLZ Bridge Saw, Original Operating Manual

Page: 19 / 86

4 Technical data
19 / 86
4 Technical data
4.1
Dimension machine
4.3 Connection and motor values
Information Value Unit Information Value Unit
Nominal voltage 230 V Water sump 30 l
Nominal frequency 50 Hz Cutting blade 350 mm
Power 2,2 kW Bore 25,4 mm
Power consumption 13 A Flange Ø 90 mm
Necessary protection 16 A Vibration value 2,3 m/s
2
Cutting shaft speed 2800 U/min
Motor protection class IP55
Measuring tolerance
Motor operating mode S6
Vibration value 0,2 m/sec^2
4.5 Water pump
Information Value Unit Information Value Unit
Nominal voltage 230 V Power 1 mW
Nominal frequency 50 Hz Rated current, max. 50 mA
Power 55 W Nominal voltage 3-6 V DC
Operating mode S2 Wavelength 635 nm
Pulse duration stufenlos
Class II
Protection class III
4.7 Noise emissions
Without
load
Full load Measuring tolerances
Sound pressure level 64 dB (A) 78 dB (A) Sound pressure level 4 dB (A)
Sound power level 75 dB (A) 91 dB (A) Sound power level 2,5 dB (A)
Guaranteed sound
power level
80 dB (A)
The specification defines the volume of the noise pollution, in relation to the operator's workplace and the
sound power level of the machine.
The emission values were carried out in accordance with the standards EN ISO 3744, EN 12418 and
Directive 2005/88/EC.
Information Value Unit Information Value Unit
Length 1500 mm max. Length 1250 mm
Width 640 mm max. Width 600 mm
Height 1490 mm Max. Height 100 mm
Tare weight 113 kg max. Weight 80 kg
Operating Weight 145 kg
4.2 Dimensions of cut material
4.4 Other data
4.6 Laser