8
Operating
36 / 86
8.5.3
Water supply
Heavily contaminated water reduces the service life of the water pump and the cut-off wheel.
If used frequently, change the water several times a day and collect, filter and properly dispose of
the cutting sludge
Clean the suction strainer of the water pump with each water change
8.6 Ending the cutting process
To stop the machine, open the emergency stop cover of the switch and press the red button.
NOTE!
For design reasons, the emergency stop function flap is located directly above the main switch.
An impact on the outer function flap causes an emergency stop. By opening the flap on this
switch, the machine can be switched off via the main switch!
Summary of Contents for Bridge Saw
