GÖLZ Bridge Saw, Original Operating Manual

Page: 23 / 86

5 Design and function
23 / 86
5.2 GS 350A-120
1 Base frame 9 Handle long 17 Transport security
2 Cutting head 10 Stop bracket 18 Tool holder
3 Tool holder 11 Cutting head handle 19 Laser
4 Cutting table 12
Connector / Switch
(emergency stop & main
switch)
20 Cutting head mounting
5 Water sump 13 Splash guard 21 Guide bridge
6 Pillars 14 Motor 22 Angle adjustment
7 Transport handle 15 Water pump 23 Locking lever
8 Transport wheels 16 Drain plug
Base frame
The base frame (1) is a robust aluminium construction.
Guide bridge with cutting head
The cutting head holder (20) is a welded steel construction and moves over the guide bridge (21).
The cutting head (2), drive motor (14) and cut-off wheel guard (3) are attached to the cutting head
holder. The guide bridge can be swivelled steplessly up to 45° (jolly) via the angle adjustment (22)
and thus enables mitre cuts. The cutting head holder can be fixed by means of transport locks (17).
The cutting head can be easily adjusted and moved with the cutting head handle (11).
Cutting blade protective cover
The cut-off wheel protective cover (3) protects against contact with the cut-off wheel and against
hazardous parts being thrown out. It must always be fitted during operation! The cut-off wheel
protective cover can be opened to change the cut-off wheel. The direction of rotation of the cut-off
wheel is marked with an arrow on the cut-off wheel protective cover.
Cutting table
The cutting table (4) is an extremely stable support table. Wide openings allow the water to flow
back into the water tray (5). The cutting table can be easily removed for cleaning.
1
2
3
4
5
6
10
9
7
8
11
12
13
14
15
16
17
18
19
20
21
23
22