GÖLZ Bridge Saw, Original Operating Manual

Page: 41 / 86

10 Faults
41 / 86
10 Faults
10.1 Safety Instructions for Troubleshooting
10.2 Behaviour in case of disturbances
Basically the following applies:
1. immediately initiate an emergency stop in the event of faults which pose an immediate danger
to persons or property
2. switch off all power supplies and secure against being switched on again
3. inform the person in charge at the place of operation.
4. depending on the type of fault, have the cause determined and rectified by authorised specialist
personnel.
WARNING!
Risk of injury due to improper troubleshooting!
Incorrect execution of work during troubleshooting can lead to serious injuries.
- Repair work may only be carried out by trained specialist personnel authorised by the
operator.
- Ensure that there is sufficient clearance for installation before starting work.
- Always pay attention to order and cleanliness in the working area! Loose objects,
components, workpieces, tools and cleaning equipment lying around are sources of
accidents.
- If components have been replaced, check that the spare parts have been fitted correctly.
Install all fasteners correctly. Observe screw tightening torques.
- Before recommissioning, ensure that all protective devices are correctly installed and
functional.
WARNING!
Risk of injury from unauthorized restarting!
When working on individual components, persons can be injured by unexpectedly switching on
the power supply.
- Before carrying out any work on individual components, switch off the power supply and
secure it against being switched on again.
DANGER!
Danger to life from electric current!
Touching live parts leads to death. Damage to the insulation or individual components can be life-
threatening.
- Before maintenance and repair work, switch off the electrical system and secure it against
being switched on again.
- Keep moisture away from electrical components.