2
General information
7 / 86
2
General information
2.1
Operating manual
These operating instructions provide all the information required for safe and efficient handling of
the machine and form the basis for all actions performed on it. It is an integral part of the machine
and must be kept in its immediate vicinity and accessible at all times to the personnel working on
it.
A prerequisite for safe working on the machine is that all specified safety instructions and
instructions for action are observed. The personnel must therefore have carefully read and
understood this operating manual before starting any work.
In addition, the local accident prevention regulations and general safety regulations applicable at
the place of use of the machine must be observed
2.2
Symbols, abbreviations, terms
This document uses signs, abbreviations and technical terms with the following meaning:
See under
-
Enumeration
1
Position number
1. Action step
Text in italics
Comments on facts
Refers to a document contained in the documentation supplied. The place where
the document was found is indicated in italics after the symbol.
2.3
Explanation of symbols
Warnings and safety instructions
Warnings and safety instructions in the manual are marked by pictograms and highlighted in a grey
highlighted block.
Warning and safety instructions that draw attention to fundamental dangers are additionally
introduced with signal words that express the extent of damage. These are structured as follows:
Observe all warnings and safety instructions!
Always act with caution when working to avoid accidents, personal injury and damage to
property!
The pictograms in connection with the signal words mean
SIGNAL WORD!
Origin of the danger!
Consequences if the danger is not observed.
-
Code of conduct to avoid the danger
DANGER!
... indicates an imminent danger that will result in death or serious injury if not avoided.
WARNING!
… indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Summary of Contents for Bridge Saw
