GW-WR150N/GW-WR150ND 150Mbps Wireless Router User Manual
56
Field
Description
mode is
Auto
.
Beacon Interval
By default, wireless beacon signal sends data to station
every other 100 ms. The range is 20~999.
DTIM (
Delivery Traffic
Indication Message
)
The default DTIM is 1ms. The range is 1~255.
Fragment Threshold
Set the fragmentation threshold. Packets larger than the
size set in this field will be fragmented. Too many data
packets will lower the wireless network performance. The
Fragment Threshold
value should not be set too low. The
default value is 2346.
RTS Threshold
Set the RTS (Request to send threshold.) threshold. When
the packet size is large than the preset RTS size, the
wireless router will send a RTS to the destination station to
start negotiation. When receiving the RTS frame, the
wireless station will send back a CTS frame to the wireless
router, to indicate that they can communicate with each
other. The default value is 2347.
TX Power
Set the Tx power of the wireless router. The default value is
100. The value 100 indicates full power.
Short Preamble
Enable or disable short preamble. The default setting is
Disable
.
Preamble defines the length of CRC correction block for the
