GW-WR150N/GW-WR150ND 150Mbps Wireless Router User Manual
125
(1)
Use the cable to connect PC to AP.
(2)
Check the network security setting.
(3)
Try to reset the device by pressing
Reset
.
Can not search the router.
(1)
Try to reset the router and test AP again.
(2)
Check the setting of the wireless network card.
(3)
Check the SSID and the encryption setting.
Why does wireless Internet access via the device fail?
(1)
Place the device to the wireless area where user can access the Internet.
(2)
Check whether the wireless network card can connect to the right base.
(3)
Check whether the wireless channel accords with the channel that your
country or zone states.
(4)
Check the encryption configuration.
(5)
Check whether your ADSL cable is connected to the correct interfaces.
(6)
Replace a network cable to connect to the device.
Why does the Internet access fail?
(1)
Check whether the LEDs status on the ADSL modem and the wireless
router is normal.
(2)
Check whether the WAN indicator is on. If the WAN indicator is off, please
check whether the cable connected to the WAN interface is loose.
(3)
When the Link indicator keeps on but does not blink, it indicates that the
router has accessed the Internet.
(4)
Reboot your computer.
(5)
Set the AP again.
(6)
Check whether the WAN LED is on.
(7)
Check the encryption setting of wireless network.
(8)
Check whether the PC that connects to the router can acquire the IP
address via the wireless network or the cable network.
(9)
Check the LAN settings of your Internet options, and do not use a proxy
server for your LAN. See the following figure:
