A
GOTIS AST-2 R documentation
This operating and maintenance manual explains GOTIS.
GOTIS
means:
G
oldhofer
O
ver
T
orque-
I
ndication-
S
ystem.
A.1
Introduction
This operating and maintenance manual summarises the most
important points for putting GOTIS into operating quickly and safely.
This GOTIS operating and maintenance manual does not replace
the general AST Operating and Maintenance manual. It forms a part
of the AST operating and maintenance manual.
You must comply with the warning instructions in the GOTIS
operating and maintenance manual and in the AST operating and
maintenance manual, in particular the safety information and the
“Important Notes” in the operating manual, as well as statutory
regulations and accident prevention legislation.
A.2
Proper use
GOTIS is a Goldhofer system used to monitor the nose wheel
torques.
GOTIS is used for all aircraft with overtorque requirements that are
approved for the Goldhofer AST product range. (see approvals)
Any other use is deemed to be improper use. The manufacturer is not
liable for any resulting damage; the risk is borne solely by the user.
A further condition of proper use is that the manufacturer’s
prescribed operating, maintenance and repair regulations must be
complied with.
Unauthorised changes to GOTIS will negate all liability by the
manufacturer for any damages that may be incurred as a result of
such changes.
rsi / 03.2009
Goldhofer Aktiengesellschaft ··· Donaustrasse 95 ··· D - 87700 Memmingen
BA part 1/0
GOTIS AST-2 R
Phone +49 (0)8331/15-0 ··· FAX +49 (0)8331/15-239
GOTIS_AST-2-R_eng_00.vp
Chapter A
Primary information
Page 1
Property of American Airlines
