5.1.4
Checking the output signal at measuring amplifier
This check tests the output signal at the measuring amplifier in mA.
See section 6 for the nominal values for the electrical check.
The output signal from the measuring amplifier is displayed on the
TDM. To do this call up the relevant menu.
Calling up TDM
1.
Ignition on
- Press the “menu” key (F9)
2.
Select “GOTIS”
3.
Select “OVT sensor signals”
4.
the output signals from the measuring amplifier are displayed
- see figure 4, item 1
WA part 1/0
GOTIS AST-2 R
Page 6
Fig. 4
Checking the output signal at measuring amplifier
Property of American Airlines
