Instruction Manual - Touch Screen
2011, 2848, 2860, 2872, and 2873 (32 oz. Pop-O-Golds)
PopClean Elite Popper -600 Series
2911, 2948, 2960, 2972, and 2973 (52 oz. Medallions)
Page 9
gmpopcorn.com
7.
The small power cord (6 pin Jones Plug) is the oil pump harness which supplies power
to the oil dispense unit. The load cell wire harness connects the oil level indicator on
the Touch Screen Control to the load cell sensor for the oil dispense unit.
8.
To connect the oil dispense system to the popper, refer to the Bag-in-a-Box or Bucket
Pump Instruction Manual included with the unit. (Generally, poppers with a Bag-in-a-
Box option are shipped with the oil dispense unit pre-installed. Bucket Pump units are
shipped separately and must be installed during setup of the unit).
Note:
Once popper installation is complete, and the oil dispense unit is attached, the
Oil Level (located on the digital display) can be calibrated. Reference Initial
Startup
–
User Configuration section of this manual.
9.
Open the cabinet base and remove all accessory items from the pull out corn drawer.
10.
Units with a Deep Well
(48”, 60”, 72” Models
only):
By default, the unit is shipped
from the factory with the corn pan in a deep well position. If needed, the corn pan may
be raised to an elevated position using the 3 front pins and the 3 back pins as a rest
(see image below).
11.
Units with a RH or LH Chute Option:
Reference next section for chute installation.
12.
After setup, the unit should be cleaned. The kettle has a food grade protective coating
applied to the cooking surfaces, this coating must be removed prior to operating the
unit (see Care and Cleaning section of this manual).
Corn Pan
Deep Well Corn Bin View
3 Back Pins
Used to elevate the Corn Pan
for a shallower Corn Bin.
3 Front Pins
Used to elevate the Corn Pan
for a shallower Corn Bin.