manualshive.com logo in svg

Gold Medal PopClean Elite Popper 600 Series, Instruction Manual, Page: 56 / 65

Share
Download
Gold Medal PopClean Elite Popper 600 Series Instruction Manual Download Page 56

Instruction Manual - Touch Screen 

2011, 2848, 2860, 2872, and 2873 (32 oz. Pop-O-Golds)

 

 

PopClean Elite Popper -600 Series

 

2911, 2948, 2960, 2972, and 2973 (52 oz. Medallions) 

 

Page 56 

 

 

gmpopcorn.com 

 

Weekly Clean the Crisper/Blower Filters 

1.

 

Turn machine OFF, unplug unit and allow it to cool before attempting to clean. 

2.

 

Lift off the corn pan to view the blower assembly. 

3.

 

Remove each filter guard from the filter assembly (reference filter image shown), then 
lift filters out and clean using warm soapy water (or replace if needed).  Rinse filters 

thoroughly and allow to dry, before reinstalling.  

Clean the Crisper/Blower Compartment 

The blower compartment MUST be inspected/cleaned every 3-4 months by Qualified Service 
Personnel to maintain proper operation. 

1.

 

Turn machine OFF, unplug unit and allow it to cool before attempting to clean. 

2.

 

Lift off the corn pan to view the blower assembly. 

3.

 

Remove the blower cover and if required, carefully clean the blower compartment, 

and underneath the element with a vacuum only (reference image shown). 

4.

 

After cleaning, reassemble blower cover and corn pan. 

 

 

 

Blower Compartment

 - located under 

the Corn Pan; shown with blower cover 

removed. (Cover to be removed by 
Qualified Service Personnel only.) 
 

 

Blower Compartment

 - located under 

the Corn Pan; shown with blower cover 

removed. (Cover to be removed by 
Qualified Service Personnel only.) 
 

Filter Guard  

Remove guard to 

access filter.  

 

Filter 

 

Filter 
Assembly 

 

Summary of Contents for PopClean Elite Popper 600 Series


































































Reviews:

No comments