Instruction Manual - Touch Screen
2011, 2848, 2860, 2872, and 2873 (32 oz. Pop-O-Golds)
PopClean Elite Popper -600 Series
2911, 2948, 2960, 2972, and 2973 (52 oz. Medallions)
Page 26
gmpopcorn.com
Equipment Controls Screen:
Manually activate/deactivate an equipment selection.
The Equipment Control screen is accessible from various screens to manually activate or deactivate an
equipment selection. To manually change a selection, reference the information below. For a full
description of each equipment control, reference Navigating the Touch Screen Control section N6
Equipment Controls.
FILTER SYSTEM
–
Equipped with a timeout feature which automatically shuts the Filter System off after an
allotted period of idle time (no popcorn popped). If the Filter System is turned off during a cook cycle,
the kettle heat will shut off.
KETTLE HEAT
–
Automated by the cooking cycle (blocked from manual operation, selection is always dimmed).
STIR MOTOR
(in kettle)
–
If the Stir Motor is turned off during a cook cycle, the kettle heat will shut off.
POPCORN CRISPER
–
Powers crisper in corn staging area (for Twin Units - RH Touch Screen controls the crisper).
OIL MASTER
–
Supplies power to the oil unit (Bag-in-a-Box or Bucket Pump).
Important Note:
To stop oil flow at any time, turn Oil Master OFF.
To Pop Corn:
When a recipe is selected the equipment is automatically turned ON.
The Kettle Heat, Stir Motor, and
Filter System MUST BE ON to pop corn.
To manually turn the crisper OFF for a cook cycle, reference
the instructions below.
Manually turn Popcorn Crisper OFF/ON and continue a cook cycle:
Any manual adjustments made on this screen will revert to the default setting after each batch of
popcorn is popped.
1.
Select desired recipe (on Recipe Selection screen).
2.
Press OK to proceed to Cook screen and begin kettle heating.
3.
Once on the Cook screen, press the Equipment Button.
4.
Press Popcorn Crisper button to turn it OFF/ON, then exit to return to cook screen with kettle
heating.
IF Filter System or Stir Motor is turned OFF during a cook cycle
, the kettle heat will shut OFF
and the cook cycle will stop (on exit, the screen reverts to Recipe Selection).
Exit Button
(returns to
previous screen)
Selection Indicator
Light
(ON indicates
selection is active)
Equipment Selection
(press to activate/
deactivate)
Blocked selection(s) are
dimmed.
Note:
For ALL selections, allow adequate time for the
selection(s) to register prior to exiting the screen.
If Filter System or Stir Motor are
turned OFF
during a cook cycle,
the kettle heat will
shut OFF
!