GMW IPP 144 - 40 G, User Manual

Page: 12 / 60

11
Installation
The IPP 144 - 40 G fits into a DIN standard panel cut out. It
is inserted into the switchboard opening from the front side
and is fixed against the switchboard rear using mounting
screws. The switchboard thickness must not exceed 12 mm.
46
4.1. Pin assignments
Pin
assignment
4. Connection
Connect the unit as shown in the connection diagramms.
Observe all national safety regulations, especially for the power supply
connections.
WARNING: This device must be grounded .
WARNING: This device must be grounded -ACHTUNG: Dieses Gerät muss geerdet werden !
IPP 144 - 40 G
Opt.: . . . . . . .
.
A l a r m
L N
1
+
-
Serien Nr.:
Serial No.:
No.de serie
Lithium battery inside ( VERSION E )
CE
IPP-AW
10 V...19 V DC; 20 VA
19 V...36 V DC; 18 VA
Interface II
Interface I
1
6
RS 232 C
RS485
Profi Bus
USB
1
Sig GND RXD (+)
5
9
RTS RTS
DTR
DTR TXD
CLA +5Vis GND RXD (- )
6
5
9
RTS
DTR
Sig GND
TXD
RXD GND
85 V...265 V AC; 45...60Hz ; 15W
EN 61010 -1:2001 CAT III
Sets
line feed Command: ESC 3n
<< Code >>
0x1B , 0x33 , n (0
≤ n ≤ 25 , initial value n=60)
<< Function >>
Sets the amount of line feed per line to n dot.
<< Details >>
Line feed can be set separately for the standard mode.