GMW IPP 144 - 40 G, User Manual

Page: 25 / 60

24
6. Adjustment
6.1. General settings
The various settings and device parameters are selected
and set via the menu program (see chapter 5.3.).
The appendix contains a summary.
NORMAL: The printout can be read during
printing.The last line that was printed out is
on top.
INVERSE: The printout is made top down, the last
print line is at the bottom. In this case the
printout is in the proper chronological order
after the paper has been torn off.
·
·
PRINT
FORMAT
CHARACTER /
LINE 48: 48 characters per line = standard character width
40: 40 characters per line
24: 24 characters per line
20: 20 characters per line
The character width can be switched via the serial interface
(at the beginning of a line and only if the input buffer is empty).
CHARACTER
SET
Available character sets are:
ASCII, GERMAN, FRENCH, SWEDISH/FINNISH (S/SF),
DANISH, NORWEGIAN, SPANISH, UK (English) and
CYRILLIC.
Character sets see appendix 8.2. „Character Sets“ !
Print formats can be switched via the serial interface (see
appendix 8.2. „additional control characters“), if the input
buffer is empty!
The print strength can be set in 4 steps.
•
LEVEL 1 minimum print
strength
•
LEVEL 2
•
LEVEL 3
•
LEVEL 4 maximum print
strength
The print strength changes immediately after the selection
has been made.
PRINT
STRENGT
33
With Handshake, provided RTS (or XON/XOFF protocol) is
used to control the data transmitter:
Data input:
<Ctrl C> 1 <CR> <Ctrl C> 2 <CR> <Ctrl C> 3 <CR>
Actual Print-out:
Machine No. 3 pre-stored Text No. 1
Automatic mode pre-stored Text No. 2
Status NORMAL pre-stored Text No. 3
7.4. Version E (IPP 144 - 40 GE)
7.4.1.Text entry
Text can only be entered via Interface II.
The maximum text length is 40 characters. If the text length
exceeds 40 characters, only the first 40 characters are
saved.
Text will be input via Windows programming software. There
is a special task for inputting, adding, overwriting and
deleting texts. The text number must be two-digit.
You must set the following printer parameters:
Baudrate: 9600
Data format: 8
Parity: NO PARITY
Interface: SERIAL
For details of the Input task see the Windows programming
software manual.