GMW IPP 144 - 40 G, User Manual

Page: 28 / 60

27
Finally the currently set date is printed out again.
>>> 24. 03. 2004
Note:
Incorrect entries, e.g. day 33 of a month, will not be
accepted by the printer.
Instead, it starts over at the base value 00.
Date entry
SET CALENDAR NO ?
„SELECT“
YES ?
„ENTER“
SET CALENDAR 15. 03.2004
_5. 03.2004
The printed cursor to the left of the 5 indicates that
this position can be modified; in our example this is
the decade of the day value. The „Select“ key is
used to print the possible values successively; in
our example this is 0, 1, 2 and 3, To accept the
value press „Enter“; the cursor jumps to the next
position to the right ... etc.
The date is set like the time. After the current time
has been printed, the following line appears:
30
7. Functional description
7.1. Start Printing
To start the printing, the IPP 144-40 G expects only
the character <CR> (Carriage return, Enter).
Note:
<LF> alone has by itself no effect combined with
other control characters (calling text, send clock, start
print interval -see following sections).
If characters are transmitted without the print triggering
character, the IPP 144 - 40 G prints them
after approx. 3 seconds.
Other widely used print trigger characters such as
<FF> Form feed are ignored.
Note:
-
Standard interface RS 232 only permits
1 sender / 1receiver. Do not connect more than
4 IPP’s as receivers.
- Only interface RS 485 allows up to 32 receivers !
Each IPP 144 - 40 G / IPP 144 - 40 GE printer is
addressable.Thus, several printers can be supplied
with different data via one data line.
Up to 31printers can be connected to one sender
device (e.g. a PLC). The respective address is set in
the menu program.
7.2. Addressing
S P S
Up to 32 printers