GMW IPP 144 - 40 G, User Manual

Page: 17 / 60

16
Set slider switch S 101to the left hand side !
(see „Interface selection“ 4.2.)
Sender active,
IPP 144 - 40 G
passive
Sender passive
IPP 144 - 40 G
active
„I“ identifies the direction in which the current flows
(20 mA).
Current loop
Sender active IPP 144-40G passive
Sender passive IPP 144-40G active
100 Ohm
41
8.3. Details of printer control commands
8.3.1. Short view of control commands
Print character commands (Section 8.3.2.)
ESC - n
Specifies/clears underline
GS ! n Specifies character size
Bitmap image commands (Section 8.3.3.)
ESC * m nL nH
Specifies column bitmap image
ESC A* nL nH Specifies raster bitmap image
Line feed fommands (Section 8.3.4.)
ESC 2
Specifies initial line feed
ESC 3 n Specifies line feed
Barcode commands (Section 8.3.5.)
GS H n
Selects print position of HRI character
GS h n Sets barcode height
GS w n Sets width of barcode
GS k m / GS k m n Prints barcode
Print position commands (Section 8.3.6.)
ESC $ nL nH
Specifies absolute position
8.3.2. Print character commands
Specifies /
clears
underline
Command: ESC - n
<< Code >>
0x1B , 0x2D, n (0
≤ n ≤ 2 , 48 ≤ n ≤ 49 , initial value n=0)
<< Function >>
Specifies or clears an underline
n Function
0, 48 Clears underline
1, 49 Sets a 1-dot wide underline and
specifies an underline