manualshive.com logo in svg

GMC 2002 Safari, Owner'S Manual

Share
Download
GMC 2002 Safari Owner'S Manual Download Page 9

1-2

Seats and Seat Controls

This section tells you about the seats 

--

 how to adjust

them, take them out and put them back in. It also tells
you about bucket and bench seats, power seats and 
head restraints.

Manual Front Seats

CAUTION:

You can lose control of the vehicle if you try to
adjust a manual driver’s seat while the vehicle is
moving. The sudden movement could startle and
confuse you, or make you push a pedal when you
don’t want to. Adjust the driver’s seat only when
the vehicle is not moving.

Two-Way Front Seat

The bucket seats can 
be adjusted forward or
rearward using the lever
located under the front 
of the seat.

Move the seat adjustment lever located under the front
of the seat toward the outboard side of the seat to unlock
it. Slide the seat to where you want it. Then release the
lever and try to move the seat with your body, to make
sure that the seat is locked into place.

Summary of Contents for 2002 Safari

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands