manualshive.com logo in svg

GMC 2002 Safari, Owner'S Manual

Share
Download
GMC 2002 Safari Owner'S Manual Download Page 377

Long Trip/Highway Scheduled Maintenance

7-43

100,000 Miles (166 000 km)

j Inspect spark plug wires. 

An Emission Control Service. 

j Replace spark plugs. 

An Emission Control Service.

j If you haven’t used your vehicle under severe service conditions listed

previously and, therefore, haven’t changed your automatic transmission fluid,
change both the fluid and filter.

j Change transfer case fluid.

j Inspect Positive Crankcase Ventilation (PCV) valve. 

An Emission Control Service. 

150,000 Miles (240 000 km)

j Drain, flush and refill cooling system (or every 60 months since last service,

whichever occurs first). See “Engine Coolant” in the Index for what to use.
Inspect hoses. Clean radiator, condenser, pressure cap and neck. Pressure test
the cooling system and pressure cap. 
An Emission Control Service. 

ACTUAL

SERVICED BY:

MILEAGE

DATE

ACTUAL

SERVICED BY:

MILEAGE

DATE

Summary of Contents for 2002 Safari

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands