manualshive.com logo in svg

GMC 2002 Safari, Owner'S Manual

Share
Download
GMC 2002 Safari Owner'S Manual Download Page 161

3-12

5. Press one of the four pushbuttons within five

seconds. Whenever you press that numbered
pushbutton, the station you set will return.

6. Repeat the steps for each pushbutton.

In addition to the four stations already set, up to three
more stations may be preset on each band by pressing
two adjoining pushbuttons at the same time and by
performing the following steps:

1. Tune in the desired station.

2. Press SET. SET will appear on the display.

3. Press two adjoining pushbuttons at the same time,

within five seconds. Whenever you press the same
two pushbuttons, the station you set will return.

4. Repeat the steps for each pair of pushbuttons.

Setting the Tone (Bass/Treble)

BASS: Slide this lever up or down to increase or
decrease bass.

TREB (Treble): Slide this lever up or down to increase
or decrease treble. If a station is weak or noisy, you may
want to decrease the treble.

Adjusting the Speakers (Balance/Fade)

BAL (Balance): Turn the control ring behind the 
upper knob to move the sound to the left or right
speakers. The middle position balances the sound
between the speakers.

FADE: Turn the control ring behind the lower knob to
move the sound to the front or rear speakers. The middle
position balances the sound between the speakers.

Summary of Contents for 2002 Safari

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands