manualshive.com logo in svg

GMC 2002 Safari, Owner'S Manual

Share
Download
GMC 2002 Safari Owner'S Manual Download Page 214

4-29

CAUTION:

Do not load your vehicle any heavier than the
GVWR, or either the maximum front or rear
GAWR. If you do, parts on your vehicle can
break, and it can change the way your vehicle
handles. These could cause you to lose control
and crash. Also, overloading can shorten the 
life of your vehicle.

Using heavier suspension components to get added
durability might not change your weight ratings. Ask
your dealer to help you load your vehicle the right way.

NOTICE:

Your warranty does not cover parts or
components that fail because of overloading.

If you put things inside of your vehicle 

--

 like suitcases,

tools, packages, or anything else 

--

 they will go as fast

as the vehicle goes. If you have to stop or turn quickly,
or if there is a crash, they’ll keep going.

CAUTION:

Things you put inside your vehicle can strike 
and injure people in a sudden stop or turn, 
or in a crash.
D Put things in the cargo area of your vehicle.

Try to spread the weight evenly.

D Never stack heavier things, like suitcases,

inside the vehicle so that some of them are
above the tops of the seats.

D Don’t leave an unsecured child restraint 

in your vehicle.

D When you carry something inside the

vehicle, secure it whenever you can.

D Don’t leave a seat folded down unless 

you need to.

Summary of Contents for 2002 Safari

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands