manualshive.com logo in svg

GMC 2002 Safari, Owner'S Manual

Share
Download
GMC 2002 Safari Owner'S Manual Download Page 25

1-18

Q:

If I’m a good driver, and I never drive far from
home, why should I wear safety belts?

A:

You may be an excellent driver, but if you’re in 
an accident 

--

 even one that isn’t your fault 

--

 you

and your passengers can be hurt. Being a good
driver doesn’t protect you from things beyond 
your control, such as bad drivers.

Most accidents occur within 25 miles (40 km) 
of home. And the greatest number of serious
injuries and deaths occur at speeds of less than 
40 mph (65 km/h).

Safety belts are for everyone.

How to Wear Safety Belts Properly

Adults

This part is only for people of adult size.

Be aware that there are special things to know about
safety belts and children. And there are different 
rules for smaller children and babies. If a child 
will be riding in your vehicle, see the part of this 
manual called “Children.” Follow those rules for
everyone’s protection.

First, you’ll want to know which restraint systems 
your vehicle has.

We’ll start with the driver position.

Driver Position

This part describes the driver’s restraint system.

Lap-Shoulder Belt

The driver has a lap

-

shoulder belt. Here’s how to 

wear it properly.

1. Close and lock the door.

2. Adjust the seat so you can sit up straight. 

To see how, see “Seats” in the Index.

Summary of Contents for 2002 Safari

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands