manualshive.com logo in svg

GMC 2002 Safari, Owner'S Manual

Share
Download
GMC 2002 Safari Owner'S Manual Download Page 158

3-9

When you close a vent, it will increase the flow of air
coming out of any vents that are open.

If you have rear heating or rear air conditioning, you
will have adjustable vents in the rear of the vehicle to
help direct the airflow. The rear air conditioning vents
are located in the headliner at the rear of the vehicle.
The rear heating vents are located next to the second and
third seat on the driver’s side of the vehicle, near the
floor. You can move the vents to direct the flow of air, 
or close the vents altogether. When you close a vent, it
will increase the flow of air coming out of any vents that
are open.

Ventilation Tips

D Keep the hood and front air inlet free of ice, snow or

any other obstruction (such as leaves). The heater
and defroster will work far better, reducing the
chance of fogging the inside of your windows.

D When you enter a vehicle in cold weather, turn the

fan to HI for a few moments before driving off. 
This helps clear the intake ducts of snow and
moisture and reduces the chance of fogging the
inside of your windows.

D Keep the air path under the front seats clear of

objects. This helps air to circulate throughout 
your vehicle.

Summary of Contents for 2002 Safari

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands