manualshive.com logo in svg

GMC 2002 Safari, Owner'S Manual

Share
Download
GMC 2002 Safari Owner'S Manual Download Page 118

2-45

Mirrors

Inside Day/Night Rearview Mirror

You can adjust the mirror for day or night driving. 
Press the tab forward (away from you) for day driving.
Pull the tab back (toward you) for night driving.

Outside Manual Adjust Rearview Mirrors

Adjust your outside rearview mirrors so you can see a
little of the side of your vehicle and the area beside and
behind your vehicle, from a comfortable driving position.

You can fold the mirrors inward before entering a car
wash. Pull the mirrors toward the vehicle. Push the
mirrors back out when finished. After pushing the
mirror out, the adjustment will be maintained.

Power Remote Control Rearview Mirrors
(If Equipped)

To adjust the outside rearview mirror, move the selector
switch in the middle of the control to L for the driver’s
side mirror or to R for the passenger’s side mirror. Then
use the arrows located on the four

-

way control pad to

move the mirror in the desired direction. To make sure
you do not accidentally move a mirror, return the
selector switch to the middle position (off) after
adjusting the mirrors.

Summary of Contents for 2002 Safari

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands