Page 15
• Dilute detergent per supplier’s instruction.
•
DO NOT
hose down or pressure wash any part of the mixer.
•
NEVER
use a scrubber pad, steel wool, or abrasive material to clean the mixer.
•
NEVER
use bleach (sodium hypochlorite) or bleach-based cleaner.
•
ALWAYS
remove the agitator after each batch as the agitator can become stuck on the shaft and become
difficult to remove.
The entire mixer, including removable parts, must be thoroughly cleaned and sanitized using the
procedures identified by your local health department and the ServSafe Essentials published by the
National Restaurant Association Educational Foundation (NRAEF). Visit www.servsafe.com for
more details.
It is extremely important to sanitize the mixer and to follow the instructions on the quaternary
sanitizer container to ensure proper sanitation is achieved.
ALWAYS DISCONNECT OR UNPLUG THE ELECTRICAL POWER FROM THE MIXER BEFORE
CLEANING.
RECOMMENDED CLEANING
PART
REQUIRED ACTION
FREQUENCY
Agitators
Hand-wash using mild soap and water, rinse, dry and
sanitize.
Clean after each use.
Removable Bowl Guard Hand-wash using mild soap and water, rinse, dry and
sanitize or place in dishwasher.
Clean after each use.
Bowl
Using a sponge or cloth, mild soap and water, apply
pressure to ensure the bowl is clean, rinse, dry, and
sanitize. The bowl can also be placed in a dishwasher.
Clean after each use.
Rear Splash Guard
Hand-wash using mild soap and water, rinse, dry and
sanitize.
Clean after each use.
Bowl Cradle
Hand-wash using mild soap and water, rinse, dry and
sanitize.
Daily
Planetary Shaft
Wipe with clean damp cloth, dry and sanitize. Apply a light
quantity of Globe oil (mineral oil) to the planetary shaft after
cleaning.
Clean after each use.
Exterior
Hand-wash using mild soap and water, rinse, dry, and
sanitize. DO NOT use a water hose!
Daily
Hub Interior
Wipe with clean damp cloth, dry, and sanitize.
Daily
Cleaning Instructions
Summary of Contents for SP10
Page 2: ......
