background image

Page 7

Installation

CONNECTING TO ELECTRICAL POWER cont’d.

If the unit needs to be hard-wired, have a licensed electrician connect the unit to the power supply.

Three Phase Units:   

You must confirm proper rotation of all 3 phase mixers prior to using the mixer. There 

is a 50% chance your 3 phase mixer is properly rotating if you are using it on 3 phase 

power.

 

 

 

1. Make sure there is not a mixing tool on the mixer shaft and the bowl is empty.

 

2. Put the speed lever on one speed and turn the unit on.

 

3. Make sure the large, gray planetary casting is going in the direction of the arrow on  

 

    the mixer as you stand in front of the mixer (clockwise). (Do not pay attention to the 

 

    shaft rotation.) If it is traveling in the wrong direction, have a licensed electrician switch 

 

    the electrical connection and retest. 

9.  Complete and register the warranty information online at www.globeslicers.com/warranty.asp.

10. Clean the mixer prior to using it.  Follow the cleaning instructions starting on page 14.   

 

NOTE:

  It is normal for the factory to apply a generous amount of grease in and on the machine. 

 

Excess grease (brown in color) will be on all metal surfaces (e.g. top portion of bowl guard, speed control,  

 

 

bowl clamps, bowl lift lever, and attachment hub thumbscrew).  Excess high-pressured grease

 

(brownish-black) may also be found on the planetary shaft and some drippings may be found in the bowl.  

Operating Instructions

TO AVOID SERIOUS PERSONAL INJURY:

• 

DO NOT

 operate the mixer before reading the instruction manual first.

• 

ALWAYS

 disconnect or unplug electrical power before cleaning, servicing, or

 

adjusting any parts or attachments.

• 

ALWAYS

 keep hands, hair, and clothing away from moving parts.

 

ABOUT THE REMOVABLE BOWL GUARD (if applicable)

The bowl guard can be rotated or removed to accommodate the operator’s function. The interlocking bowl guard is 

easy to remove and reattach for easy cleaning in a sink or dishwasher.

 

NOTE: When guard is open or not properly installed, the mixer will not operate.

  

 

NOTE: Rotate the bowl guard clockwise (open) and counterclockwise (closed) to

 

attach agitators to the mixer.

Opening / Rotating the Bowl Guard:

Rotating the bowl guard clockwise (open) and counterclockwise (closed), allows the 

operator to easily add ingredients and properly remove the agitator and bowl from the 

mixer.

 

1. When the separated handles are lined up together and pushed securely to the right 

 

of the mixer, the bowl guard is in the locked position and ready to operate (fig. 7-1)

fig. 7-1

Summary of Contents for SP10





















Reviews: