Page 16
Your new Globe mixer will provide years of uninterrupted service, but only if you do the following:
Installation
• Do not use an extension cord to connect electrical power.
• Make sure all 3 Phase units (see data plate) run in the direction of the arrow on front of the machine.
Operation
• Turn off the mixer prior to changing speeds.
• Follow the capacity chart on page 17, especially for mixing dough.
• Use only first (1) speed for mixing dough. 2nd speed should never be used on 50% AR or lower with the
exception of the SP60. The SP60 requires a 50% reduction in batch size to mix in speed 2 with 50% AR
dough.
• If the unit shuts off during mixing (overload protection trips), reduce the batch size.
Maintenance
• Add
only
2 pumps of grease to the planetary grease fitting once a year.
Important Points
Recommended Maintenance
PART
REQUIRED ACTION
FREQUENCY
Planetary Ring
Reapply grease (e.g. black axle grease).
Once a year.
Inject grease (2 pumps only) into zerk fitting
on the side of planetary. DO NOT overfill!
Bowl Slide Rods
Apply Globe oil (mineral oil) on the bowl slide rods.
If the bowl becomes difficult to
Raise and lower the bowl to distribute the oil onto
raise or lower.
the rods.
Gear Oil Meter
Contact a Globe authorized servicer to change the
Once a year. When the gear oil
(SP62P and
gear oil.
meter shows the oil being below
SP80PL only)
half of the circle.
Summary of Contents for SP10
Page 2: ......