Gilson PIPETMAN P, Manual

Page: 12 / 84

12
PIPETMAN
®
P
8 - PERSONALIZING YOUR PIPETTE
Personal Label - Application Name Tag
In addition to the
four round adhesive
stickers, supplied
with your pipette,
you can identify
your pipette with a
Coloris clip. Made
of polyacetal, these
clips accept perma-
nent ink, and wipe
clean with ethanol.
Ideal for recording service or calibration dates.
Perfect for quick visual identification. Also useful
for identifying pipettes dedicated to specific
applications or as a warning when there is risk
of contamination.
These brightly colored clips snap quickly over
the connecting nut of Pipetman models P2 to
P1000. Because they don’t require dismantling
or changing original parts, there’s no danger of
the pipette’s calibration being affected.
Tip-ejector: Dual-position Adaptor for P2
and P10
The component parts of a tip-ejector assembly
are a metallic rod and a blue plastic connector,
which goes into the body of the pipette.
For P2 and P10, a
dual-position adaptor
(plastic) is also
required; the metallic
rod is shaped so that
the adaptor may be
clipped to it in either of
two positions.