SkyEdge II VSAT Installation and Monitoring
Figure 20: Start Alignment
Result: The VSAT restarts in Antenna Alignment mode.
The device works by reading the outbound signal received by the VSAT. As the
antenna position is adjusted, the strength of the signal is indicated simultaneously in
two different forms:
Bar graph with Eb/N0 reading
Audio signal through speaker. The higher the pitch and strength of the sound, the
higher the reading.
The optimal angle is achieved when the indicators are at their maximum values.
10.
Activate the speaker by clicking on it.
Figure 21: Rx Signal before Alignment
11.
Rotate the antenna until the Rx Signal is optimized.
SE VSAT Install and Monitor
May, 2007
17
Proprietary and Confidential
Summary of Contents for SkyEdge II
Page 2: ......
