Gilat Satellite Networks SkyEdge II, Installation Manual, Page: 14 / 34

SkyEdge II VSAT Installation and Monitoring
N
OTE
The password above is the default. Check with your hub operator to
verify that the password has or has not been changed
Result: The Setup page opens (Figure 9).
Figure 9: Setup (compressed view)
N
OTE
Figure 9 hides all of the specific parameters in order to view the entire
page.
3. Enter all of the configuration parameters as shown in Figure 10 and explained in
Table 1.
N
OTE
„
Parameters marked with an asterisk (*) must be typed in the field. All
other parameters are selected from the drop-down list.
„
Each of the parameters has a pop-up with the valid range.
„
If an out of range value is used a warning will appear next to the
parameter as shown below.
SE VSAT Install and Monitor
May, 2007
8
Proprietary and Confidential