SkyEdge II VSAT Installation and Monitoring
Figure 4: Info Page Before Configuration
The Info page, viewable by all users, contains the following:
Identity
– VSAT ID (if configured), part number and serial number (factory
assigned)
Hardware
– identifies the hardware version of the main board and any
expansion cards present
Software
– lists the factory boot version, active boot version and operation
version of the VSAT. A VSAT that has never received operational code will have
a message instead of the code version.
Networking
– lists the MAC address, Admin IP address and Admin subnet mask
(factory assigned)
3.
Click Telemetry to view the available telemetries (Figure 5).
SE VSAT Install and Monitor
May, 2007
5
Proprietary and Confidential
Summary of Contents for SkyEdge II
Page 2: ......
