SkyEdge II VSAT Installation and Monitoring
6.
The VSAT Info page is updated.
Figure 29: VSAT Info page for Active VSAT
3.5
Activating CW
3.5.1
Activating CW from the LCD Keypad
C
AUTION
DO
NOT
TRANSMIT
A
CW
UNLESS
AUTHORIZATION
TO
TRANSMIT
IS
GIVEN
BY
THE
HUB
OPERATOR!
If the commissioning of the VSAT cannot successfully be carried out from the hub it
will be necessary to initiate a CW broadcast from the VSAT. In this case, the VSAT
will stay in Boot mode and no Operational code will be downloaded.
To send a CW to the hub:
1.
On the Install page, click
CW
.
Result: The CW page opens. The CW Off dialog box (Figure 30) is located in
the middle of the page
SE VSAT Install and Monitor
May, 2007
23
Proprietary and Confidential
Summary of Contents for SkyEdge II
Page 2: ......
