SkyEdge II VSAT Installation and Monitoring
1.
To open the SkyManage web page type
192.168.1.1
in the address bar and click
to open.
Result: The SkyManage home page opens (Figure 3).
Figure 3: SkyManage Home Page
The home page, viewable by all users, contains the following information (for an
operational VSAT additional parameters are shown):
The VSAT status (in this case Boot) is shown by the logo in the upper left corner
Active code
type - Boot or Operational
Outbound Lock
state – Unlocked or Locked
LAN Port 1 and 2–
speed and duplex mode mode
Powering mode –
Normal/Low Power/Power Save
Operation time –
time since VSAT was powered on or reset
2.
Click
Info
to open the page (Figure 4) showing the hardware and software
components of the VSAT
SE VSAT Install and Monitor
May, 2007
4
Proprietary and Confidential
Summary of Contents for SkyEdge II
Page 2: ......
