
9
Initial configuration
Gigaset T300 PRO / Gigaset T500 PRO / englisch / A31008-M2212-R102-3-7619 / admin_configuration.fm / 19.03.2012
V
e
rsion 2, 06.0
8
.2010
Firmware update
The
Firmware auto update
option provides the phones with the latest firmware available.
The devices use the new firmware once the machine is restarted. You can edit the devices
to be updated in the
Limiting autoprovisioning/authorized MAC addresses
section.
If the firmware update is active, you can perform the update immediately via the
Update
now
button.
Limiting autoprovisioning/authorized MAC addresses
If you do not wish autoprovisioning to be active for every newly connected phone, then
you should enable the
MAC address constraint
checkbox. This setting means that only
phones already registered to the PBX will be provisioned.
¤
Now enter the MAC addresses of the additional phones to be included in the list. The
MAC address for Gigaset pro phones can be found on the devices' type plate or on the
web user interface under
Status
¢
Device
.
¤
If you wish to deactivate the MAC address constraint temporarily, simply deactivate
the
MAC address constraint
checkbox. MAC addresses already entered in the list are
retained.
Detection and configuration of phones with network search
If you use SIP phones, which cannot or should not be automatically provisioned, these can
be configured using a network scan. This process also works for various ATA and analogue
cards.
Start the search by clicking on
Search now
, which will detect all the devices existing in the
local network and automatically configure them, if they have not already been configured.
Please note
The firmware update is only available, if
Autoprovisioning new phones
is enabled.