62
Lines
Gigaset T300 PRO / Gigaset T500 PRO / englisch / A31008-M2212-R102-3-7619 / admin_administration.fm / 19.03.2012
V
e
rsion 2, 06.0
8
.2010
Extended settings for analogue cards
The
Signaling
is the method by which connected devices are alerted that the other part
has hung up.
Kewlstart
is usually the correct choice for internal lines to devices. For
external lines to the telephone network, you may have to choose
loopstart
in the event
of your provider not supporting
kewlstart
.
Emergency number
The official emergency numbers 110 and 112 are set by default. However, these must still
be named and assigned to at least one line. Open the details view via
K
and add the line(s)
using
p
. Where there are several lines, the top one in the list is given priority. You can
changes the sequence by using arrow symbols in the
Position
column.
Using
S
or
New Emergency Telephone Code
, you can define any number of additional
phone or special numbers.
Important
The type of signalling depends on the respective device and/or phone service provider.
Check with the manufacturer and your provider about the correct signalling!
Caution
So that direct dialling to emergency numbers works, each number must be assigned
at least one external line. The line (or the provider) must support the dialling of
emergency numbers. This is not the case with every provider, contract or line type!
Caution
As soon as a number is saved as an emergency number, it is no longer available as an
internal phone number. This also applies for numbers already assigned to users. If
emergency numbers are deleted, they can be assigned as internal phone numbers again.
This must be considered when deleting the official emergency numbers 110 and 112.
