background image

98

Operating the Gigaset N300A IP base answering machine

Gigaset N300/N300A IP / GBR / A31008-M2214-L101-2-7619 / answering_m.fm / 16.07.13

V

e

rsion 4, 16.0

9

.2005

Please note:

u

Recording ends automatically if the maximum recording time of 170 seconds is 
exceeded or there is a break in speech for more than 2 seconds.

u

If you cancel the recording, the default announcement is used.

u

The recording is not started or cancelled if the answering machine memory is 
full.

¤

Delete old messages and the answering machine will automatically switch 
back to 

Answer & record

 mode. 

¤

Repeat recording if required.

Listening to announcements/

advisory messages

v

 

¢

Ì

 

¢

Announcements 

¢

Play Announcement

/

Play Advisory Msg.

q

If several answering machines are assigned to the handset, select the 
answering machine and press 

§OK§

.

If you have not recorded a personal announcement, the relevant pre-recorded 
announcement is played.

You can cancel playback by pressing 

a

 or 

§Back§

.

Record a new announcement while playing the announcement:

§New§

 

Press the display key.

If the answering machine's memory is full, it will switch to 

Answer only

 mode.

¤

Delete old messages and the answering machine will automatically switch back 
to 

Answer & record

 mode. Repeat recording if required.

Deleting announcements/advisory messages

v

 

¢

Ì

 

¢

Announcements 

¢

Del. Announcement

/

Del. Advisory Msg.

q

If several answering machines are assigned to the handset, select the 
answering machine and press 

§OK§

.

§Yes§

Press the display key to confirm the prompt. 

Once you have deleted your announcement for the specified answering machine, 
the relevant pre-recorded announcement is used again. 

Summary of Contents for N300 A IP







































































































































































































Reviews: